Skip to content
SolidRock Coatings

Pool decks · Cost guide

What does pool deck resurfacing cost?

Clear pricing for pool deck resurfacing in Miami — cool deck, spray texture and overlays by the square foot, what changes the number, and how resurfacing compares to tearing out and replacing.

Priced by the foot, cooled for Florida.

Resurfacing is quoted by the square foot, and the finish you choose — a classic spray texture, a heat-reflective cool deck, or a stone-look overlay — sets the range. The condition of the existing deck decides the prep.

Typical installed cost

$6$15

per sq ft

Preparation, resurfacing and sealer, installed. Minimums apply on small decks. Every deck is quoted after a site visit.

Ranges by finish

The finish drives the price. Here's what each typically runs, installed, in the Miami market.

FinishInstalled range
Spray texture / knockdownThe classic Florida cool deck — slip-considered texture, many colours.$6–10
Cool deck coatingHeat-reflective; stays noticeably cooler underfoot in the sun.$8–12
Stamped / stone overlayPatterned overlays that mimic stone, brick or travertine.$10–16
Microcement / premium overlaySeamless, contemporary, higher-end.Quoted per project

Indicative installed ranges in the Miami market, per square foot, including preparation, resurfacing and sealer. A planning guide, not a quote — your figure depends on the deck's condition, size and finish, confirmed after a site visit.

What moves the number

Two decks of the same size can price differently. These are the deciders.

  1. Deck condition & cracks

    Sound concrete resurfaces cleanly; spalling, cracks and hollow areas need repair first, and that's where cost is added.

  2. Square footage & shape

    Large, simple decks are efficient per foot; tight curves around the pool, steps and coping add detailed hand-work.

  3. The finish

    A spray texture is the most economical; heat-reflective cool decks, stamped patterns and overlays step up in both look and price.

  4. Heat & slip

    A cooler, more slip-considered surface for a sunny, wet pool deck is worth specifying — and factors into the system chosen.

  5. Sealer & colour

    The sealer is chosen for sun, salt and pool chemicals; custom colours and borders add to a plain field.

What an estimate includes

  • Cleaning and surface preparation
  • Crack and spall repair as needed
  • The resurfacing system and finish you choose
  • A UV- and chemical-resistant sealer
  • Clean edges around coping and a tidy handover

What's usually separate

  • Major concrete repair or slab replacement
  • Pool coping, tile or waterline work
  • Drainage or grading changes
  • Screen enclosure or fencing work
  • Deck furniture moving and storage

How the options compare

Resurfacing is usually a fraction of tearing out and replacing. Indicative US ranges below; they move with deck condition, size and finish.

OptionInstalled range
Resurfacing / overlayWorks over sound existing concrete — cooler, fresh, and no demolition.$6–16 / sq ft
Pavers over the deckDurable and premium, but heavier, higher cost and a different look.$12–25 / sq ft
New concrete deckTear-out, disposal and re-pour — the most disruptive and costly.$12–20 / sq ft
Porcelain / stone tileHigh-end and beautiful; material plus labour and the right substrate.$20–40 / sq ft

Cost questions, answered

Get a pool deck estimate

Tell us about your deck and we'll give you a clear, itemised price — the finish, the sealer and the timeline, with no obligation.