Microcement · Cost guide
What does microcement cost?

Priced by the foot, shaped by the room.
Microcement is priced per project, because the real cost depends on what's underneath, how the surface will be used and the finish you choose. Here's what drives it — and how we arrive at a firm figure in a written quote after a site visit.
Typical installed cost
Price Upon Request
Ranges by where it goes
The same finish costs more where it works harder. Wet areas and floors take more coats, more preparation and a tougher seal than a feature wall.
| Where | Pricing |
|---|---|
| Feature & full wallsFewer coats, easier access — the most economical way to live with microcement. | Upon request |
| FloorsHigher wear demands, more surface preparation and a harder-wearing sealer. | Upon request |
| Bathrooms & showersWaterproofing detail, small areas and more labour per foot. | Upon request |
| Countertops & stairsBespoke, low-area, high-detail work priced on the drawings. | Upon request |
Every project is priced individually. Your figure depends on the substrate, scope and finish, and is confirmed in a written quote after a site visit.
What moves the number
Two rooms of the same size can be quoted differently. These are the things that decide where you land in the range.
- 01
Surface preparation
The condition of what's underneath. Sound, level substrates cost less; cracked tile, uneven concrete or moisture issues add remediation before a trowel touches the wall.
- 02
Area & layout
Large, continuous areas are more efficient per foot. Small rooms, niches, stairs and tight details cost more per foot because they are slower to work by hand.
- 03
Coats & finish
Floors and wet areas take more layers and sealing than a wall; a polished, high-sheen finish takes more passes than a matte one.
- 04
Color & effect
A single integral color is the simplest. Multi-tone, veined or metallic effects are hand-worked and take longer to achieve.
- 05
Access & site
High floors, occupied homes, protecting adjacent finishes and parking all affect the working day — and therefore the price.
- 06
Sealer & protection
The topcoat is chosen for the room. A kitchen or bathroom needs a tougher, more chemical-resistant seal than a bedroom wall.
What a quote includes
- Assessment and preparation of the substrate
- Primer, base and finish coats applied by hand
- Your chosen integral color and finish
- The protective sealer matched to the room's use
- Surface protection and a clean handover
What's usually separate
- Major substrate repair or floor levelling
- Removing existing tile or flooring
- Plumbing and waterproofing membranes behind wet areas
- Underfloor heating installation
- Moving and storing furniture
How it compares
Microcement rarely competes on the lowest sticker price — it competes on the seamless, grout-free result and on going over existing surfaces, often without demolition. Indicative US ranges below move with region, scope and finish.
| Surface | Pricing |
|---|---|
| MicrocementSeamless, no grout lines, applied over most existing surfaces — often without demolition. | Upon request |
| Porcelain tileFinish plus labour and grout; removing the old surface is usually required. | Upon request |
| Epoxy / resin floorHard-wearing for garages and utility spaces; a more industrial look. | Upon request |
| Polished concreteOnly where there's a slab worth polishing; a cooler, grayer aesthetic. | Upon request |
| Venetian plasterFor walls and ceilings; a deeper, more classical sheen than microcement. | Upon request |